Author : Sharmishta P N 1
Date of Publication :21st June 2018
Abstract: Near field, communication is being used for many days today applications like e-passports, ticketing system, access control, loyalty cards, payments etc. Passive proximity integrated circuit card and proximity coupling device are used with the principle of inductive coupling. This is a wireless communication with the carrier frequency of 13.56MHz within the scope of 10cm. An FPGA platform is implemented to perform the digital system validation. Validation is performed to make sure that it is in compliance with ISO/IEC 14443 protocol with Type A communication. Some of the functional Test methods used are from ISO/IEC 10373 – Part 6 protocol. The validation is performed for multiple process corners, all protocol commands, and antenna classes varying from class 1 till class 6, baud rate up to 848kbps, extreme temperature conditions, and multiple iterations for lowest achievable field strength. The following is performed to ensure the best fit for the operating field, data rate and chip area.
Reference :
-
- K. Finkenzeller. "RFID handbook: radio-frequency identification fundamentals and applications", translated by R. Waddington, John Wiley & Son., Chichester 1999.
- ISO/TEC 14443-2:2010, Identification cards Contactless integrated circuit cards - Proximity Cards - Part 2: Radio frequency power and signal interface.
- ISO/IEC 14443-2:2012, Amd 3 & 5 Identification cards - Contactless integrated circuit cards - Proximity Cards, Bits rates of fc/S, fc/4 and fc/2; Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC.
- K. Klaus Finkenzeller and J. Wiley, RFID Handbook: J. Wiley & Sons, 2003.
- International standard ISO/IEC 14443, International Standardization Organization, April 2003.
- ISO/IEC FDIS 18000-3: RFID for item management-Air interface, Part 3 - Parameters for air interface communications at 13.56 MHz, April 2003.
- Young-Nam Yun; “Beyond UVM for practical SoC verification”, SoC Design Conference (ISOCC), 2011 International, pp158-162, 2011.
- S. Chen, V. Thomas, "Optimization of Inductive RFID Technology," Proc. IEEE Int. Symp. Electronics and the Environment 2001, Denver, CO, pp. 82-87
- N. G. Choi, H. J. Lee, S. H. Lee and S. J. Kim, "Design of a 13.56MHz RFID System," in ICACT 2006, Korea, vol. 1, pp 840-843.
- S. Meillère, H. Barthélemy, M. Martin, "13.56 MHz CMOS transceiver for RFID applications," Analog Integrated Circuits and Signal Processing archive, vol. 49, pp 249-256, December 2006. (Pubitemid 44663938)
- Min-Woo Seo; Yong-Chang Choi; Young-Han Kim; Hyung-Joun Yoo “A 13.56MHz RFID transceiver SoC for multi-standard reader”, 2009.